AIVO Networks
Aivo Ancp3005q Avycon High Power Indoor/Outdoor Cpe 5.8ghz Up To 300mbps
$130.00
/
AIVO ANCP3005Q AVYCON HIGH POWER INDOOR/OUTDOOR CPE 5.8GHz UP TO 300Mbps
- High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset - Range up to 6 miles away with line of sight
- Can be used to connect remote IP cameras to existing NVR’s / DVR’s - Supports up to 300Mbps
- Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz bandwidth in use on most Wi-Fi today.
- Dual 14dBi antennas
- Supports the following operation modes: Bridge, Access Point, Router and Repeater
- Supports providing PoE power to a single IP camera attached to CPE
- Includes 48V PoE power injector which allows for powering CPE from up to 330ft. away
- LEDs provide information about system status and signal strength for alignment in Bridge mode
- Hardware Reset button
- Outdoor Rated down to -40°F
- Supports Pole, Wall or Rack Mounting
Specifications
Description | ANCP3005Q |
---|---|
CPU | Qualcomm AR9344 560Mhz CPU SE2576L PA Chipset – 64MB DDR2 / 16MB SPI |
Antenna | Integrated Dual 14dBi Antennas |
Wi-Fi Standards | IEEE802.11a/an |
RF Output Power | 200mW (23dBm) |
RF Sensitivity | -96dBm |
RF Frequency | 802.11a/n: 5.180Ghz – 5.825Ghz |
Bandwidth | 300Mbps |
Physical Ports | 1 x 10/100 Mbps WAN Ethernet Port 1 x 10/100 Mbps LAN Ethernet Port 1 x Toggle switch for PoE output for IPC 1 x Reset Button |
LED Indicators | Power / WAN / LAN / Wi-Fi Level Signal Strength |
Power | PoE 802.3at/af Adapter: 48V PoE Power Adapter |
Power consumption | <8W |
Installation Methods | Pole Mounting, Wall Mounting or Rack Mounting |
Product Dimensions | 10.2” x 3.1” x 2.1” (262mm x 80mm x 53mm) |
Net weight | 0.7lbs |
Working Environment | -40˚F ~ 131˚F / 10% ~ 90% RH, Non-condensing |
Storage Environment | -58˚F ~ 167˚F / 5% ~ 90% RH, Non-condensing |
Contents
• CPE | • Power Cord |
• Stainless Cable tie | • Installation Guide |